30kw medium frequency induction melting furnace

Performance characteristics of 30kw medium frequency induction melting furnace

1. Fast heating and uniform heating (speed can be adjusted and controlled)

2. Wide heating, can heat all kinds of metal workpieces (change the detachable induction coil according to the different working switches).

3. Easy to install, just connect the power supply, induction coil and water inlet and outlet pipes; small size, light weight, easy to use.

4. Quick start, heating can be started after water and electricity are connected.

5. Eliminate high voltage, avoid the step-up transformer that generates nearly 10,000 volts of high voltage, and the safety is very high.

6. The operation is simple and can be learned in a few minutes

7. Less power consumption, about 70% less power than old-fashioned tube high-frequency equipment, the smaller the workpiece, the less power consumption.

8. Fully protected, with alarm indications such as overvoltage, overcurrent, overheating, and water shortage, and automatic control and protection.

9. The effect is good, the heating is very uniform, the temperature rises quickly, the oxide layer is less, and there is no waste product after melting.

10. The temperature is controllable, and the heating temperature of the workpiece can be controlled by setting the heating time, so that the heating temperature can be controlled to a technical point.

30kw medium frequency induction melting furnace work site