This morning, one of our company's 40kw ultrasonic induction annealing equipment has been packed and shipped to the customer's factory in Vietnam. This Vietnamese customer needs to anneal the ends of steel wires and steel strips, and requires the equipment frequency to be 30-80khz. After understanding other specific requirements, our colleagues recommended this 40kw ultra-audio induction annealing equipment to him.
This customer told our colleagues that the diameter of the steel wire in their factory is 30mm, and the diameter of the heating coil required is about 30mm; the width of the steel strip is 300mm, and the thickness is 3mm. The size of the heating coil required is: width 45mm-50mm, thickness 10- 15mm, the coil length is about 15mm. At the same time, in order to avoid deformation of the surface of the annealed steel wire, the customer specifically mentioned that the induction coil should not be too close to the surface of the material. We like such attentive and cautious customers, so there is no reason for us not to do our best to meet his workpiece heating requirements! After subsequent communication, our colleague suggested that the customer use 40kw ultra-audio annealing equipment to anneal his steel wires and strips.
Now, the equipment is on its way to Vietnam. Moreover, the equipment is wrapped with a layer of bubble film when packaging. In order to avoid bumping into the equipment during long-distance transportation (although the probability of this happening is almost zero), careful colleagues even use wooden boxes to package the equipment. High quality fumigation free plywood wooden box. In addition, the wooden box also contains product manuals and other information carefully prepared by our colleagues, so this customer must not be too moved when receiving the equipment!
en 
cn 
jp 
ko 
de 
es 
it 
ru 
pt 
vi 
th 
pl 
GS-ZP-1200
