Forging manufacturers use medium frequency induction diathermy furnaces for round bar forging. Round bar forging requires an automated production line. Zhengzhou Gou's will create a more convenient and suitable medium frequency diathermy furnace production line for you. The medium frequency diathermy furnace production line basically includes a turning device. Feeding device, induction furnace, intermediate frequency power supply, storage device, thermometer. Let customers buy with confidence, Zhengzhou Gou's provides you with a complete set of equipment.
Equipment features of medium frequency induction diathermy furnace:
1. Fast heating speed and high production efficiency. The medium frequency induction diathermic furnace heats evenly, has small temperature difference between the core and surface, and has high temperature control accuracy.
Induction heating generates heat within the workpiece itself, so the heating is uniform and the temperature difference between the core and the surface is small. The application of temperature control system can achieve precise control of temperature and improve product quality and qualification rate.
2. The working environment is superior, improves the workers' working environment and the company's image, is pollution-free, and has low energy consumption.
Compared with coal furnaces, medium-frequency induction heating furnaces prevent workers from baking and smoking beside coal furnaces on hot days. They can also meet various index requirements of the environmental protection department, and at the same time establish the company's external image and the future development trend of the forging industry. . Induction heating is a more energy-saving heating method in electric heating furnaces. Heating a ton of forgings from room temperature to 1100°C consumes less than 360 degrees of electricity.
3. Fast heating speed, high production efficiency, less oxidation and decarburization, saving material and forging die costs.
Since the principle of medium-frequency induction heating is electromagnetic induction, the heat is generated in the workpiece itself. Ordinary workers using the medium-frequency electric furnace can start heating and forging work ten minutes after going to work. There is no need for professional workers to burn and seal the furnace in advance. There is no need to worry about the waste of billets heated by the coal furnace due to power outages or equipment failures. Due to the fast heating rate of this heating method, there is very little oxidation. Compared with coal-fired furnaces, each ton of forgings can save at least 20-50 kilograms of steel raw materials, and its material utilization rate can reach 95%.
This medium-frequency induction diathermy furnace has a high degree of automation and a small footprint. It is a more suitable diathermy product for modern factories. According to different workpieces, a suitable heating furnace can be customized. A suitable heating furnace body can achieve better results. Heating effect. Medium frequency induction heating furnaces can be operated by non-professionals.
Daily maintenance of medium frequency induction diathermy furnace:
1. Check whether the water cooling system is blocked or leaking, whether the water pressure relay is sensitive, and the inlet water temperature difference should generally not be greater than 35°C.
2. Check whether there is overheating in the thyristor, electrical busbar, transformer and each line segment
3. Clean the oil and dust from various electrical components and other equipment, and use a fan or leather tiger to clean the dust.
4. Check the insulation condition of the induction coil and whether there is water leakage
5. Check and clean the sink, check the drain valve, and remove certain sewage to prevent scaling.
6. Check whether each wiring screw is tightened to ensure good contact.
7. Check whether the wires and switches are damaged. 8. Check and clean the radiator to maintain efficient cooling effect, and pickle if necessary.
en 
cn 
jp 
ko 
de 
es 
it 
ru 
pt 
vi 
th 
pl 
GS-ZP-1200
