Do you know these advantages of using medium frequency induction heating equipment to quench and heat treat workpieces?

Using medium frequency induction heating equipment to perform quenching heat treatment on workpieces has the following advantages:

(1) The outer wall temperature of the furnace is low, the energy loss is small, and the operation is easy.

(2) Due to the use of induction heating, heat is generated from the workpiece itself, which has a higher power density than external heating and can quickly obtain a large amount of heat.

(3) A proportional temperature control transformer is used, so the temperature control response is quick and accurate.

(4) Compared with general heating equipment, the output of medium frequency induction heating equipment is increased by about 70%.

(5) The operating cost is lower than that of general equipment, because the induction heating efficiency is 80%, while gas heating is only 20%. Taking into account factors such as the water cooling loss of the sensor and the relatively low cost of gas heating, the thermal efficiency is still 53%-54%.

(6) No pollution caused by combustion chamber and combustion products.

This article briefly introduces the advantages of using medium frequency induction heating equipment for quenching heat treatment of workpieces, hoping to deepen your understanding of medium frequency induction heating equipment. If you still don’t understand anything, please feel free to leave us a message.