Fork hardening by supersonic frequency induction heating power supply

The fork is a part of the car gearbox. It is connected to the shift handle and is located at the lower end of the handle. The middle shift wheel is moved to change the input/output speed ratio. Therefore, the fork is an important part of the car. Now, many fork manufacturers are using supersonic frequency induction heating power supply to conduct induction quenching heat treatment on the fork, and they all say that the quenching effect is very good.

Features of supersonic frequency induction heating power supply

1. It has heating-insulation-cooling three-stage function setting, which is conducive to improving the heating quality and heating cycle, and simplifying manual operation.

2. The company adopts MOSFET, IGBT power devices and unique frequency conversion technology to run stably and provide higher reliability and durability.

3. Under the same conditions, it has twice the power saving effect compared with traditional electronic tube high-frequency heating equipment.

4. With 99% full load design, it can work continuously for 24 hours.

5. Select the power supply according to the power and frequency. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the heat permeability.

6. With constant current and constant power control functions, it can greatly optimize the heating process of metals, realize efficient and rapid heating, and give full play to the superiority of the product.

Applications of supersonic frequency induction heating power supply

1. Hot heading of various high-strength bolts and nuts

2. Quenching of various gears, sprockets and shafts.

3. Quenching of various internal combustion engine parts and deceleration surface parts.

4. Quenching of various axle shafts, leaf springs, shift forks, valves, rocker arms, ball studs and other auto parts.

5. Welding of various hard alloy cutter heads and saw blades.

6. Quenching of hand tools such as pliers, knives and scissors, axes and hammers.

7. Welding of various diamond composite drill bits.

8. Welding of various picks, drill bits, drill pipes, coal drill bits, air drill bits and other mining equipment.

Supersonic frequency induction heating power supply is small in size and easy to operate, not only suitable for factory use, but also suitable for laboratory use, in general, it can meet the needs of various occasions.