Camsahft hardening by supersonic frequency induction hardening equipment

The camshaft is a component in a piston engine. Its function is to control the opening and closing of the valve. Cars, passenger cars, and motorcycles all need to use camshafts, which shows that the application of camshafts is quite extensive. The supersonic frequency induction hardening equipment produced by Zhengzhou Gou's is a good equipment for hardening the camshaft. This equipment is a product developed by us through continuous efforts, and it is quite popular all over the world.

Advantages of supersonic frequency induction hardening equipment

1. Eliminate high voltage, avoid the step-up transformer that generates nearly 10,000 volts of high voltage, and the safety is very high.

2. Fast heating speed, uniform heating (speed can be adjusted and controlled)

3. Easy to install, just connect the power supply, induction coil and water inlet and outlet pipes to use. Small size, light weight, easy to use.

4. The operation is simple and can be learned in a few minutes

5. The temperature is controllable, the heating temperature of the workpiece can be controlled by setting the heating time, so that the heating temperature can be controlled to a technical point.

6. Quick start, heating can be started after water and electricity are turned on.

7. Wide heating, can heat all kinds of metal workpieces. (replace the detachable induction coil according to the different working switches)

8. Less power consumption, about 70% less power than old-fashioned high-frequency tube equipment, the smaller the workpiece, the less power consumption.

9. Full protection There are overvoltage, overcurrent, overheating, water shortage and other alarm indications, and automatic control and protection.

10. Good effect, very uniform heating, fast heating, less oxide layer, no waste products after annealing.

Other applications of supersonic frequency induction hardening equipment

1. Hot heading of various high-strength bolts and nuts

2. Quenching of various axle shafts, leaf springs, shift forks, valves, rocker arms, ball studs and other auto parts.

3. Welding of various picks, drill bits, drill pipes, coal drill bits, air drill bits and other mining equipment.

4. Quenching of various internal combustion engine parts and deceleration surface parts.

5. Quenching of various gears, sprockets and shafts.

6. Welding of various hard alloy cutter heads and saw blades　

7. Quenching of hand tools such as pliers, knives and scissors, axes and hammers.

8. Welding of various diamond composite drill bits

If you have workpieces that need quenching, if you have workpieces that need diathermy forging, you can use our equipment. We can make more professional technical solutions for you according to your workpiece.