Tableware heating by supersonic frequency induction annealing machine

A few days ago, we sold a 120kw supersonic frequency induction annealing machine abroad. The customer used this equipment to heat the tableware and said that the heating effect is quite good. At present, our super audio frequency induction annealing machine has been sold all over the world.

Performance characteristics of supersonic frequency induction annealing machine

1. Select the power supply according to the power and frequency. The higher the frequency, the shallower the heating depth, and the lower the frequency, the better the heat permeability.

2. Under the same conditions, it has the effect of twice the power saving compared with traditional electronic tube high-frequency heating equipment.

3. The company adopts MOSFET, IGBT power devices and unique frequency conversion technology to ensure stable operation and provide higher reliability and durability.

4. With 99% full load design, it can work continuously for 24 hours.

5. It has heating-insulation-cooling three-stage function setting, which is conducive to improving the heating quality and heating cycle, and simplifying manual operation.

6. With constant current and constant power control functions, it can greatly optimize the heating process of metals, realize efficient and rapid heating, and give full play to the superiority of the product.

Advantages of supersonic frequency induction annealing machine

1. Fast heating, fast heating speed, uniform heating. (speed can be adjusted and controlled)

2. Easy to install, just connect the power supply, induction coil and water inlet and outlet pipes. It is small in size, light in weight and easy to use.

3. Wide heating, can heat all kinds of metal workpieces (change the detachable induction coil according to the different working switches)

4. Less power consumption, about 70% less power than old-fashioned tube high-frequency equipment, the smaller the workpiece, the less power consumption.

5. The operation is simple and can be learned in a few minutes.

6. Quick start, heating can be started after water and electricity are turned on.

7. The effect is good, the heating is very uniform, the temperature rises quickly, the oxide layer is less, and there is no waste product after heating.

8. The temperature is controllable, and the heating temperature of the workpiece can be controlled by setting the heating time, so that the heating temperature can be controlled to a technical point.

9. Eliminate high voltage, avoid the step-up transformer that generates nearly 10,000 volts of high voltage, and the safety is very high.

10. Full protection, with overvoltage, overcurrent, overheating, water shortage and other alarm indications, and automatic control and protection.