The fork is a part of the car gearbox. It is connected to the shift handle and is located at the lower end of the handle. It toggles the middle shift wheel to change the input/output speed ratio. Seeing this, people often think that the fork needs to be quenched and heat treated, and few people think that the fork needs to be heat treated through forging. If the fork is too hot, we recommend that you use a medium frequency induction heating power supply.
Diathermy, as we all know, is to prepare for the next step of forging, and the same is true for fork diathermy. The fork uses a medium-frequency induction heating power supply for diathermy heat treatment. The operation method is very simple, that is, put the fork in the sensor, and then start heating until the temperature reaches 1150°C.
The medium frequency induction heating power supply is a high-tech product based on the modern and advanced power electronic technology theory, which selects power electronic devices from manufacturers that are widely used in the world, and is produced with strict technical requirements. When it conducts diathermy heat treatment on the fork, the heating speed is very fast, which effectively avoids the oxidation and decarburization of the fork during the diathermy process, ensures the diathermy effect of the fork, and makes the temperature of the fork after diathermy more evenly. What's even better is that the equipment will not produce noise and dust during the working process, which improves the working environment of the workers and has received unanimous praise from the workers.
en 
cn 
jp 
ko 
de 
es 
it 
ru 
pt 
vi 
th 
pl 
