Milling cutter brazing by high frequency induction brazing machine

Many milling cutter manufacturers are using something called a high-frequency induction welding machine for welding heat treatment, and they all say that the effect is quite good. Heard that this device is very popular all over the world, today, we take a look at its wonderful.

Performance characteristics of high frequency induction brazing machine

1. The heating speed is fast, and the heating time of ordinary heat treatment (such as quenching and annealing) generally does not exceed 10 seconds per piece, which solves the problem that the oxide layer is too thick due to the long heating time of the traditional heat treatment process.

2. Energy saving, 3/4 energy saving than the original electronic tube high-frequency machine, gas, gas furnace, electric furnace, etc.

3. Small size, light weight, will not occupy too much production space, and the working position can be moved at any time to facilitate production needs.

4. The operation is simple, you can learn it as soon as you learn it, and there is no open flame, no high temperature and high pressure when working (the working voltage of the induction coil is 36V), which has good safety.

5. The heating position can be controlled freely, and it will not generate too much heat to the position that does not need to be heated, which meets the heat treatment requirements of special work (such as: gear, sprocket tooth surface quenching, local heat treatment of bars.)

Advantages of high frequency induction brazing machine

1. Fast heating speed, uniform heating. (speed can be adjusted and controlled)

2. Easy to install, just connect the power supply, induction coil and water inlet and outlet pipes; small size, light weight, easy to use.

3. The power is controllable. When heating, the power can be adjusted to meet the needs of different heating temperatures and speeds.

4. Wide range of heating can heat all kinds of metal workpieces (replace the detachable induction coil according to the different working switches)

5. The operation is simple and can be learned in a few minutes

6. Fast start-up, heating can be started after water and electricity are applied.

7. Less power consumption, about 70% less power than old-fashioned tube high-frequency equipment, the smaller the workpiece, the less power consumption.

8. Full protection, with alarm indications such as overvoltage, overcurrent, overheating, water shortage, etc., and automatic control and protection.

9. The effect is good, the heating is very uniform, the temperature rises quickly, the oxide layer is less, and there is no waste product after welding.