Rivets are commonly used hardware parts and are widely used in production and life. The forming of rivets requires a series of complicated processes, the most important of which is heat penetration. We usually use medium frequency induction heating machine for rivet diathermy, and the effect is very good.
On the basis of zero-voltage start, the intermediate frequency induction heating machine adds an automatic frequency sweep and repeated start function. The voltage and current circuits are closely tracked. The start and stop of the equipment are smooth and stable, without current impact, and the equipment has multiple self-protection functions: , overcurrent, water shortage, overheating, high frequency, low frequency, phase loss protection, etc. If there is any manual error in operation, the machine will automatically alarm immediately to protect the life of the machine itself. Even better, the medium-frequency induction heating machine can not only heat-treat the rivets as a whole, but also partially heat-treat the rivets according to the requirements of customers, which can meet the different processing requirements of customers.
Many customers said that compared with the previous traditional equipment, the use of medium frequency induction heating machine for heat treatment of rivets saves 50% of electricity and 70% of water, which greatly reduces the production cost, and the heating speed is fast, which greatly improves production. efficiency.
en 
cn 
jp 
ko 
de 
es 
it 
ru 
pt 
vi 
th 
pl 
