Medium frequency induction heating furnace recommended by Zhengzhou Gou's for bolt diathermy

Most domestic manufacturers use medium frequency induction heating furnaces for heating bolts. The medium frequency induction heating furnace produced by Zhengzhou Gou's is not only very popular in China, but also exported to India, Portugal, Brazil, Finland and other countries and regions. And has been well received by customers.

Advantages of Zhengzhou Gou's medium frequency induction heating furnace

1. Fast heating speed, less oxidation and decarburization.

Since the induction heating principle of the intermediate frequency furnace is electromagnetic induction, the heat is generated by the workpiece itself. This heating method has a fast heating speed, little oxidation, high heating efficiency, good process repeatability, and only a slight decolorization of the metal surface. Returns the surface to a specular shine, effectively achieving consistent performance.

2. Uniform heating, high precision temperature control.

Uniform heating ensures small temperature difference between the core and surface of the heated workpiece. The temperature can be precisely controlled through the temperature control system to ensure product repeatability.

3. The induction furnace body is easy to replace

Depending on the size of the workpiece, it is necessary to configure induction furnaces of different specifications. Each furnace is designed with a quick-change joint for water and electricity, which makes the replacement of the furnace easy, fast and convenient.

4. The degree of automation is high, which can realize fully automatic unmanned operation and improve labor productivity.

5. Low energy consumption, no pollution

The heating efficiency is high, compared with other heating methods, it effectively reduces energy consumption, high labor productivity, no pollution, and the equipment meets environmental protection requirements.

6. Fully protected equipment

The whole machine is equipped with water temperature, water pressure, phase loss, overvoltage, overcurrent, pressure limit/current limit, start overcurrent, constant current and buffer start, so that the equipment starts smoothly, protects reliably and quickly, and runs stably.

Performance characteristics of Zhengzhou Gou's medium frequency induction heating furnace

1. The equipment has complete automatic protection functions such as overcurrent, overvoltage, overtemperature, water shortage, and lack of water, and is equipped with a fault self-diagnosis and alarm system.

2. It adopts Optics IGBT power device and unique inverter technology, which are widely used in the world, and is designed with 99% load continuity rate. It can run for 24 hours under the maximum power and guarantee high reliability.

3. The equipment has the control function of constant current and constant power, which greatly optimizes the heating process of metals, realizes efficient and rapid heating, and gives full play to the superior performance of the product.

4. It is light in weight, small in size, and easy to install. It only needs to be connected to a 380V three-phase power supply, water in and out, and it can be completed in a few minutes.

5. Especially safe, the output voltage is lower than 36V, avoiding the risk of high voltage electric shock.

6. The heating efficiency is as high as 90%, the energy consumption is only 20%-30% of the high frequency of the old-fashioned electronic tube, almost no electricity is used in the standby state, and it can work continuously for 24 hours.

7. The self-control type can adjust the heating time, heating power, holding time, holding power and cooling time; it greatly improves the quality of heating products and the repeatability of heating, and simplifies the operation technology of workers.

8. The sensor can be disassembled and replaced freely and quickly, which greatly reduces the oxidation deformation of the workpiece compared with rapid heating.

9. It occupies a small area and is easy to operate, which can be learned in a few minutes.

10. It is a newer environmental protection product that replaces the heating of oxygen, acetylene, coal and other dangerous substances. It is safer and more secure to produce without open flames.