Copper forging by medium frequency induction heating power supply

Many wire factories, copper processing factories and copper handicraft processing factories in the world extrude copper embryos into copper wires, copper rods and copper pipes after intermediate frequency induction heating. We generally choose the appropriate induction heating according to the diameter of the copper billet. Frequency to fulfill customer requirements.

I recently met a customer who asked for copper rod heating. According to the material requirements provided by the customer, the material of the copper rod is Tup copper, 68 copper, the diameter of the copper rod is 63mmx250mm, the weight of the rod is 7kg, the productivity is 3mm/piece, and the heating temperature is Tup copper 900℃ , 68 copper 800 ℃, according to the above customer requirements, we choose medium frequency heating power supply 200kw, 5khz equipment.

The medium frequency heating power supply is automatic operation, with a temperature measuring device, the temperature of the copper rod is measured during the heating process, and the production cycle is controlled by a time relay. The action of the pusher: push a copper rod into the sensor, the heated rod is pushed out of the sensor and falls on the track, the track transfers the bar to the end of the track, and the ejector mechanism rises to overturn the bar On the discharge chute, the bar rolls to the extruder for extrusion. While conveying, the feeding pusher returns, and the copper rod is rolled in the feeding chute for the next feeding, and the temperature is measured. When the head enters the temperature measuring position and touches the end of the bar, the operation of feeding and discharging is completed.