The stabilizer bar is an auxiliary elastic component in the car suspension. Its function is to prevent the body from excessive lateral roll when turning, and the purpose is to prevent the car from rolling over and improve ride comfort. During the driving process of the car, the stabilizer bar inevitably bears huge friction force, so it wears out relatively quickly. For this reason, many manufacturers use medium-frequency induction heating power supply for quenching heat treatment, and the effect is good.
The medium-frequency induction heating power supply is used to quench the stabilizer bar. First, the sensor is a copy sensor made according to the specifications of the stabilizer bar, which can ensure the uniformity of quenching of the stabilizer bar to the greatest extent, and there will be no parts that cannot be quenched. defect. Secondly, the heating speed is very fast, and the required temperature is reached in a very short time, which avoids the occurrence of oxidation and decarburization, ensures the quenching effect of the stabilizer bar, and makes the stabilizer bar after quenching have a thicker surface under the hard layer. The toughness area has better compressive internal stress, which makes the anti-fatigue and breaking capacity of the stabilizer bar higher.
The medium frequency heating power supply has multiple self-protection functions: overvoltage, overcurrent, water shortage, overheating, high frequency, low frequency, phase loss protection, etc. If there is any manual error during operation, the machine will automatically alarm immediately to protect the life of the machine itself. During the quenching heat treatment process of the stabilizer bar, it will not produce noise and dust, nor will it produce waste smoke and gas, which is quite environmentally friendly.
en 
cn 
jp 
ko 
de 
es 
it 
ru 
pt 
vi 
th 
pl 
