The oil boiling method is often used for bearing hot disassembly, which is time-consuming and labor-intensive, and the temperature is not easy to control. The emerging induction heating method completely overcomes the disadvantages of difficult control of the temperature of bearing thermal disassembly and easy damage during disassembly, and is currently a widely used method. The customer chose the medium frequency induction heating machine, and the effect is very good.
The medium frequency induction heating machine is used to dismantle the bearings. The operation process is quite simple. Just put the bearings into the sensor (the sensor is a copy sensor made according to the specifications of the bearing ring), and then start the equipment to heat, and wait for the bearing After the ring is heated and expanded, use a puller to pull out the bearing. Even better, the equipment has no high voltage of 10,000 volts, is safe to operate, and can work continuously for 24 hours.
When the equipment is hot dismantling the bearing, it will not produce noise and dust, and will not produce waste smoke and gas, which greatly improves the working environment of the workers and enables the workers to realize environmentally friendly production. Even better, the equipment has complete overvoltage, overcurrent, undervoltage, water shortage, phase loss, voltage limiting, current limiting and other protection systems, thus ensuring the reliability and stability of the equipment.
en 
cn 
jp 
ko 
de 
es 
it 
ru 
pt 
vi 
th 
pl 
