Planer tool is used for planing with a cutting part. And it is composed of two parts of the tool bit and the tool bar. Among them, the tool bit is generally carbide blade, and the tool bar is generally other metals. The tool bit and the tool bar of planer tool are usually joined together by welding. The quality of the welding process is a key factor affecting the quality of planer tool.
If planer tool uses other welding methods to be welded, its welding is not fastened, and the welding surface is not smooth. So its use is inconvenient. However, our company's small high frequency induction brazing machine can be used in the planer tool welding, and the welding is very firm. And the welding seam is beautiful, which basically can not see the traces of welding.
The most important is that the method of operation is very simple. As long as the cutter head, pole and flux is put into the sensor for a good position, and then open the machine's switch to start heating until the solder melting for filling welding seam. And it is fine that the tool bit and the tool bar are tightly stick together.Our equipment is heat treated by the sensor. The sensor can be free to change, which makes the machine not only for the welding of the planer and is truly a multi-purpose machine. It has become a major heat treatment plant of the necessary equipment.