Metallic Scrap Melting in Medium Frequency Induction Melting Machine
Data：Jun 21, 2017
We all know that the melting, but not everyone really knows the melting equipment. Smelting has large and small smelting, as large as tens of tons, as small as only a few pounds. Because of melting weight of metal, we have different power equipment for selection.
A lot of metal scrap is discarded and is not reused, what shall we do? Medium frequency induction melting machine can melt it, and then cast it into other things, which is not a waste. If the metal scrap is too much more, you can also couple with our dumping furnace, so that melting is very convenient. As we all know, the frequency of medium-frequency power, but the penetration depth is deep. So the middle frequency heating power is melted for metal scrap, which can make metal enrichment of the solution more uniform without agglomeration. Moreover, the heating rate is fast and the machine can put the hard metal melt into liquid in a very short time, so you do not wait too long.
In the smelting process, due to fast heating and less heat dissipation, the oxidation rate is very low. The dumping furnace is equipped for small and medium-sized melting, and its foot-type control make the solution automatically dumped, largely to protect the safety of workers. As mentioned above, our equipment has fast heating and less heat dissipation, so the heat is not lost. Therefore, the operators can use it with confidence indoors.
- Glass Melting in High Frequency Induction Heating Power Supply06-20
- Iron smelting with 60KW Medium Frequency Melting Furnace06-21
- Induction Melting Machine for Copper Alloys Melting06-12
- High Frequency Induction Heating Furnace for Precious Metal Melting 06-21
- Aluminum Melting with Super Audio Frequency Induction Hardening Equipment06-20
- Platinum Melting in Induction Heating Machine 60KW06-17
- Induction Melting Furnace for Bronze Melting06-30