Manual Chucks Induction Quenching Process From Induction Hardening Machine Manufacturers
Data：Jun 14, 2017
The manual chuck is being quenched with our induction hardening equipment is a three-jaw chuck, which belongs to machine tool accessory and can be moved in the radial direction of the three movable claws evenly distributed on the chuck body in order that the workpiece is clamped and positioned. And after induction quenching,the manual chuck quality is higher than before.
The manual chuck induction quenching process is from Zhengzhou Gous induction hardening machine manufacturers and the induction hardening heat treatment effect is very good with this induction quenching equipment for sale. When the manual chuck is placed well for inductino hardening, the customized induction coil in the heating machine will be put in one of three embedded places of manual chuck.
Because the induction heating rate is very fast with this equipment, the temperature will be up to required temperature quickly and then the hardened places are automatically cooled with the quenching medium at a high rate of speed. And then the induction coil automatically rises to used to heating and goes on the induction hardening for another embedded place of manual chuck. So manual chuck induction quenching will be finished efficiently.
- 160KW Harvester Blade Induction Heating Mac10-28
- Bars Induction Heating Furnace 200KW07-12
- Lathe Tool Induction Brazing Machine 80KW10-31
- Tape Measure Induction Annealing Equipment 11-08
- Gold Melting with Induction Melting Machine10-30
- 80KW Stainless Steel Induction Melting Mach09-19
- 50KW Round Bars Medium Frequency Induction 07-12
- Manual Chucks Induction Quenching Process From Induction Hardening Machine Manufacturers06-14
- Knife Blade Hardening in Induction Annealing Machine for Shells05-31
- Chain Hardening in Gear Induction Hardening Equipment05-20
- Hardening Mill Rolls by Half Shaft Induction Hardening Machine07-03
- Axe Hardening with Medium Frequency Induction Heating Machine05-27
- Shovel Quenching in Induction Hardening Machine 40KW05-20
- Stabilizer Bar Quenching in Harvester Blade Induction Heating Machine12-06