Leaf Spring Steel Belt Annealing in Induction Heating Equipment
Data：Jun 06, 2017
In generally, the production of leaf spring needs steel belt with high toughness. But in the stretching and induction heat treatment, steel belt will suffer strong internal stress, which is not good for further processing. And it has very high hardness and brittleness, so leaf spring steel belt induction annealing can solve the defect with induction heating equipment.
Due to the use of induction heating machine with induction annealing, leaf spring steel belt can be heated evevly and continuously to a specified temperature, and then is carried out the insulation for some time, and then is slowly cooled in the air.
Because sometimes leaf spring needs steel belt is very thin and narrow, it requires that the machine must heat accurately the steel belt. What's more, this heating machine can contorl precisely the induction heating time and heating temperature. So the leaf spring steel belt has higher toughness to meet the requirement after induction annealing.
- Tape Measure Induction Annealing Equipment 11-08
- 80KW Stainless Steel Induction Melting Mach09-19
- Gold Melting with Induction Melting Machine10-30
- Bars Induction Heating Furnace 200KW07-12
- 50KW Round Bars Medium Frequency Induction 07-12
- 160KW Harvester Blade Induction Heating Mac10-28
- Lathe Tool Induction Brazing Machine 80KW10-31
- Fuel Spray Nozzle Annealing with High Frequency Induction Heating Machine07-06
- Annealing Copper Tube in Induction Annealing Machine for Shells06-13
- Stainless Steel Tank Annealing in Titanium Alloy Bar Induction Annealing Machine06-01
- Iron Core Annealing in Super Audio Frequency Annealing Machine06-28
- Iron Wire Annealing in Super Audio Frequency Annealing Machine06-27
- Titanium Alloy Bar Induction Annealing Machine for Stainless Steel Rod Annealing06-19
- Leaf Spring Steel Belt Annealing in Induction Heating Equipment06-06